A BTO modulator built on a commercial silicon photonics line has carried a record net 1.6 Tb/s. In PIC Magazine Issue V 2026, our Sales Director Dr Sabina Hatch explains why production metal-oxide MBE makes BTO-on-silicon manufacturable.
Access this article on page 24 in PIC Magazine —- or download it via our website directly.
PIC Magazine has published a feature by DCA Instruments in its Issue V 2026: “Barium titanate emerges as a route to faster AI optical links”, written by our Sales Director Dr Sabina Hatch.
The article starts from a result presented at OFC 2026. Researchers from McGill University, in collaboration with Ciena and Lumiphase, showed a four-channel barium titanate (BTO) transmitter, built on a commercial 200 mm silicon photonics line. It carried a net 1.6 Tb/s (4 × 448 Gb/s PAM4 over 2 km), with a 105 GHz electro-optic bandwidth and performance maintained at 85 °C.
The feature explains why BTO matters for AI interconnects and quantum photonics. Thin-film BTO on silicon has a Pockels coefficient of about 923 pm/V, roughly 30 times that of lithium niobate. That allows shorter phase shifters, lower drive voltages and less energy per bit.
It also explains what makes BTO manufacturable. BTO will not grow as an ordered crystal on bare silicon. It needs a strontium titanate (STO) seed layer only a few atomic layers thick, grown by molecular beam epitaxy. The epitaxial starting material for the OFC devices was grown on DCA metal-oxide MBE systems.
DCA’s 12″ BTO production platform brings this to 300 mm wafers: FOUP-to-FOUP automation with fully automated UHV wafer transfer, 24/7 batch processing, closed-loop process control with DCA MOSAIC and SECS/GEM factory integration. Solid-source MBE, hybrid MBE and UHV sputtering on an MBE-grown STO seed all run on one platform.
Read the full article in PIC Magazine, follow the discussion on LinkedIn, and find out more about BTO production on the pages below.
Contact: Dr Sabina Hatch, Sales Director – sabina.hatch@dca.fi
| Read the article in PIC Magazine | https://picmagazine.net/magazine/828 page 24 ff. |
| Join the discussion on LinkedIn | https://www.linkedin.com/company/dca-instruments |
| 300mm (12″) BTO Production Platform | https://dca.fi/products/bto_production/ |
| M-Series Metal-Oxide production MBE | https://dca.fi/products/uhvsystems/m-series-metal-oxide-production-mbe/ |
| Automated Transfer System | https://dca.fi/products/uhv-transfer/automated-transfer-system/ |
| DCA MOSAIC software | https://dca.fi/products/mosaic-software/ |
| Why BTO is an emerging material for integrated photonics | https://dca.fi/barium-titanate-bto-why-it-is-an-emerging-material-for-integrated-photonic-platforms/ |
| From metal-oxide MBE to record-breaking 1.6 Tb/s BTO silicon photonics | https://dca.fi/from-metal-oxide-mbe-to-terabit-scale-silicon-photonics/ |
| MOSAIC, process intelligence for thin-film deposition | https://dca.fi/dca-introduces-mosaic-a-new-generation-of-process-intelligence-for-thin-film-deposition/ |
